Rubber Kneader is used in rubber and plastic processing industry – Kneader. It is mainly used for mixing, kneading and dispersing natural rubber, synthetic rubber, recycled rubber and plastics, foamed plastics, etc., and is adapted to mixing a wide range of low-viscosity materials. The equipment helps to improve material properties, resulting in homogeneous, high-quality mixtures with specific desired properties for the production of polymeric materials such as elastomers and thermoplastics. The equipment plays a vital role in achieving uniform dispersion of fillers, colours and other additives in rubber compounds.
Rubber Kneader is used in rubber and plastic processing industry – Kneader. It is mainly used for mixing, kneading and dispersing natural rubber, synthetic rubber, recycled rubber and plastics, foamed plastics, etc., and is adapted to mixing a wide range of low-viscosity materials. The equipment helps to improve material properties, resulting in homogeneous, high-quality mixtures with specific desired properties for the production of polymeric materials such as elastomers and thermoplastics. The equipment plays a vital role in achieving uniform dispersion of fillers, colours and other additives in rubber compounds.
Model | X(S)N-3x32 | X(S)N10x32 | X(S)N20x32 | X(S)N35 x30 | X(S)N55x30 | X(S)N75*30 | X(S)N110x30 | X(S)N150x30 | X(S)N200x30 |
Total volume of mixing chamber(L) | 8 | 25 | 45 | 75 | 125 | 180 | 250 | 325 | 440 |
Working volume of mixing chamber(L) | 3 | 10 | 20 | 35 | 55 | 75 | 110 | 150 | 200 |
Rotational speed of rotor(front/rear)kw | AC5.5 | AC15 | AC37 | AC55 | AC75 | AC110 | AC185 | AC220 | AC280 |
Tilting angle degree (r/min) | 32/25.8 | 32/25 | 32/27 | 30/24.5 | 30/24.5 | 30/24.5 | 30/24.5 | 30/24.5 | 30/24.5 |
Pressure of compressed air(Mpa) | 135 | 140 | 140 | 140 | 140 | 140 | 140 | 140 | 140 |
Flip motor power(Mpa) | 0.55 | 1.1 | 1.5 | 2.2 | 3 | 4 | 7.5 | 11 | 11/15 |
Pressure of cooling water(Mpa) | 0.5-0.8 | 0.5-0.8 | 0.6-0.8 | 0.5-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 |
Heating steam pressure (plastics mixing)Mpa | 0.2-0.4 | 0.2-0.4 | 0.2-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 | 0.3-0.4 |
Heating steam pressure (refining) Mpa | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 | 0.5-0.8 |
Overall dimensions(mm) | 1660x960x1750 | 2580x1300x2280 | 2630x1520X2550 | 3200x1900x2950 | 3280x1930x3070 | 3330x2200x3340 | 3930x2800x3660 | 4200x3300x3900 | 4520x3400X4215 |
Approx. Weight(t) | ～2 | ～3.3 | ～4 | ～6.3 | ～7.5 | ～10.3 | ～15 | ～19.5 | ～22.5 |
..
Model | X(S)M-25 | X(S)M-50 | X(S)M-80 | X(S)M-110 | XM-160 | XM-250 | XM-270 | XM-370 |
Total volume of mixing chamber(L) | 26.5(two-wing) | 50(two-wing) | 80(two-wing) | 110(two-wing) | 147(four-wing) | 253(two-wing) | 250(four-wing) | 395(four-wing) |
Working volume of mixing chamber(L) | 20 | 37.5 | 60 | 82.5 | 110 | 140 | 188 | 297 |
Speed of rear rotor(R/MIN) | 40 | 40 | 40 | 40 | 4～40 | 17.24 | 4～40(6～60) | 6～60 |
Speed ratio of rotors | 1:1.16 | 1:1.15 | 1:1.15 | 1:1.15 | 1:1.16 | 1:1.16 | 1:1.17/1:1 | 1:1.5/1:1 |
Pressure of compressed air(MPA) | 0.6～0.8 | 0.6～0.8 | 0.6～0.8 | 0.6～0.8 | 0.6～0.8 | 0.6～0.8 | 0.6～0.8 | 0.6～0.8 |
Consumption of compressed air(M³/H) | 12 | 20 | 35 | 60 | 70 | 60 | Hydraulic upper ram | Hydraulic upper ram |
Pressute of cooling water(MPA) | 0.3～0.4 | 0.3～0.4 | 0.3～0.4 | 0.3～0.4 | 0.3～0.4 | 0.3～0.4 | 0.3～0.4 | 0.3～0.4 |
Consumption of cooling water(M³/H) | ～10 | ～15 | ～25 | ～35 | ～45 | ～23 | ～100 | ～150 |
Motor power(KW) | AC55 | AC90(110) | AC220 | AC250(280) | DC500 | AC250 | DC1250(1500) | DC1250KWx2 |
Overall dimensions(mm) | 4460x3225x3200 | 5560x2510x3200 | 5800x2560x4200 | 6620x2850x4400 | 8000x3300x5260 | 7100x3905x4953 | 8700x4320x6160 | 10800x4960x7040 |
Approx weight(Excluding main motor) t | ～7 | ～14 | ～22 | ～26 | ～36 | ～40 | ～50 | ～76 |
Qingdao Kusk Machinery Co., Ltd
Хуаншань, Циндао, Китай
Авторское право © 2023 Qingdao Kusk Machinery Co., Ltd Powered by Hicheng
